JVC HA-W600RF Headphones User Manual


 
8
ENGLISH
Basic operations
Selecting a better reception channel
When the playback sound is noisy, you can
choose one of the other two channels to
transmit signals on the base station.
The white noise may come out when
switching the channel. Take off the
headphones when switching the channel.
1 Slide the CHANNEL
selector on the back side of
the base station to select another
channel.
2 Press AUTO SCAN on the
headphones to tune in to
the new channel.
3 Repeat Steps 1 and 2 to select the
best channel.
Listening area
The headphones can receive the FM signal
of the base station 100 m away from it at
maximum (when no interference or obstacles
exist between them). But the receivable
range becomes shorter or reception quality
becomes poorer in the following cases:
In places such as reinforced concrete
buildings
Obstacles such as steel-reinforced doors
exist between the base station and
headphones
Items such as metal furniture are situated
nearby
In places facing a street
Noise or interference sources exist nearby
(e.g. mobile ham, radio stations, high-
voltage power lines, a microwave oven,
cordless phones, cellular phones, etc.)
HAW600_G.indb 8HAW600_G.indb 8 06.6.26 6:48:42 PM06.6.26 6:48:42 PM