Filter
Top Products
Connections
14
NOTE
• The way of connecting the system cord varies depending on the type
of the powered subwoofer.
You can enjoy the sound of an analog component.
NOTE
• The signals input to the VIDEO jack of the VCR IN jacks will be
output only from the VIDEO jack of the VIDEO OUT jacks, not from
the S-VIDEO jack of the VIDEO OUT jacks.
You can enjoy the sound of a digital component.
* DBS = Direct Broadcasting Satellite
NOTE
• Only digital audio signals can be input when selecting “DBS D” as
the source to play. (A pg. 18) When connecting a video component
such as a DBS tuner, operate this system to listen to the sound.
Make sure that all other connections have been completed.
CAUTION
• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.
• (For Central, South America, and Southeast Asia) If the AC outlets do
not match the AC plugs, use the supplied AC plug adapters.
Connecting the powered
subwoofer
Connecting to an analog
component
Powered
subwoofer
System cord
(supplied)
Center unit
Align the 5 marks.
Align the 5 marks.
or
RCA pin plug
cord
(not supplied)
1 To composite video output
2 To S-video output
3 To audio output
12 3
Center unit
VCR (
1 3 or 2 3)
TV (
3)
Cassette recorder (
3)
Composite video
cord
(not supplied)
S-video cord
(not supplied)
or
Connecting to a digital
component
Connecting the power
cord
Digital optical cord (not supplied)
To digital optical output
DBS
* tuner
MD player
Center unit
AC IN
Center unit Powered
subwoofer
Power cord
(Supplied)
Power cord
Plug into AC outlets.
Do not connect the power cord until all other connections have been made.
TH-C3C6C7C9[AUWUSUNUGUX].book Page 14 Monday, April 25, 2005 8:56 PM