Filter
Top Products
22
Using the Timers
English
1
Entering the timer setting mode.
Press the CLOCK/TIMER button on the Remote Con-
trol.
“TIMER” appears and the Timer indicator ( ) lights
up on the display.
2
Setting the ON time (Example: 10:15).
1. Press the CLOCK/TIMER button.
The hour digit of the current ON time blinks on the
display.
Press the UP (>) or DOWN (> or <) button on the Re-
mote control to set the hour you want the Unit to
come on.
Pressing the UP (>) button moves the time forwards
and pressing the DOWN (<) button moves it back-
wards. Hold down the button to move the time rapidly.
2. Press the SET button.
The minute digits of the ON time blink on the display.
Set the minute you want the Unit to come on, using
the UP or DOWN button.
3
Setting the OFF time (Example: 13:30).
1. Press the SET button.
The hour digit of the OFF time blinks on the display.
Set the hour you want the Unit to be turned off, using
the UP or DOWN (> or <) button.
2. Press the SET button.
The minute digits of the OFF time blink on the display.
Set the minute you want the Unit to be turned off, us-
ing the UP or DOWN (> or <) buttons.
• To proceed to the next step, the OFF time must differ
from the ON time.
4
Selecting the music source.
1. Press the SET button.
The “TUNER” or “CD” blinks on the display.
2. Press the UP or DOWN (> or <) button to select the
music source you want to listen to.
The display changes as shown below.
TUNER
ÔCDÔ(back to the beginning)
5
Setting the volume level.
1. Press the SET button.
The current volume setting blinks on the display.
2. Press the UP or DOWN (> or <) button to select the vol-
ume level.
-- :The volume level immediately before turn-
ing off the system is used.
0 to 50 :When the timer is turned on, the Volume
will be automatically set to the selected
level. (It is possible to fade in the sound
from volume level 0 (zero) to the preset
volume.)
6
Press the SET button.
The timer setting is completed and each setting value
appears on the display for two seconds in the order of
ON time, OFF time, music source and volume. Then,
the display returns to the display before you set the Tim-
er. The Timer indicator ( ) remains lit.
7
Before turning off the System, prepare
the music source selected in step 4.
TUNER: Tune in to the desired station.
CD: Insert a CD. (Playback will start from the first
track at Timer on.)
8
Press the %
%%
% button to turn off the Sys-
tem.
In standby mode, you can see the Timer indicator ( )
on the display.
• When the timer turns on, the Timer indicator starts
blinking and the prepared source in step 7 will be
played.
❏ During setting the timer, pressing the CANCEL button
will return to the previous setting step.
To cancel the timer, press the CLOCK/TIMER button
and then the CANCEL button. "TIMER OFF" appears and
the Timer indicator ( ) goes out on the display.
FS-SD58V_A4.fm Page 22 Thursday, September 28, 2000 4:52 PM