Filter
Top Products
10
Basic Operations
English
Fade-out Muting (FADE MUTING)
You can mute the audio output with one touch operation.
To mute the audio output, press the FADE MUTING
button on the Remote Control. Then, the audio output will
be faded out and becomes 0 (VOLUME 0).
To release muting, press the FADE MUTING button
once again. Then, the audio output will be faded in to the
original level.
• The signal output from the MD/AUX-OUT is not muted.
Reinforcing the Bass Sound
(AHB PRO)
You can reinforce the bass sound to maintain rich, full bass
at low volume.
To get the effect, press the AHB (Active Hyper Bass)
PRO button on the Remote Control.
The “AHB PRO” indicator lights up on the display.
To cancel the effect, press the same button again.
The “AHB PRO” indicator goes out.
Tone Control (TONE CONTROL)
You can control the tone by changing the bass (low frequen-
cy range level) and treble (high frequency range level).
1
Press the TONE CONTROL button on
the Remote Control to select "BASS"
or "TREBLE".
Each time you press the button, the display will change
as follows:
BASS --> TREBLE --> (original display) --> (back to
the beginning)
2
Press the UP or DOWN button on the
Remote Control to adjust the bass or
treble level.
You can adjust each level between -5 and +5. (0: Flat)
Showing the Time (DISPLAY)
You can show the current time on the display.
To display the clock, press the DISPLAY button on the
Remote Control.
To return to the previous mode, press the same button
again.
• To let the clock work, you need to set the clock first. (See
“Setting the Clock” on page 21.)
Sliding the Top Cover
(DOOR SLIDE)
Each time you press the DOOR SLIDE button on the Re-
mote Control, the Top Cover slides back and forth.
Slide the Top Cover backward to allow Unit’s top button
operation. Slide it toward you to cover the buttons.
DOWN
UP
TONE
CONTROL
(
BASS or TREBLE
)
FS-SD58V_A1.fm Page 10 Thursday, September 28, 2000 4:49 PM