Filter
Top Products
20
English
Using External Equipments
Listening to External
Equipment
You can listen to external equipment such as MD recorder,
turntable or other auxiliary.
❏ First make sure that the external equipment is properly
connected to the System. (See page 7).
1
Set the VOLUME control to the mini-
mum position.
2
Press the MD/AUX button.
“MD/AUX” appears on the display.
3
Start playing the external equipment.
4
Adjust the VOLUME control to the
desired listening level.
5
Apply sound effects, if you wish.
❏ Press the AHB PRO button on the Remote Control to re-
inforce the bass sound.
❏ Adjust the tone (bass and treble) by using the TONE
CONTROL button on the Remote Control. (See “Tone
Control” on page 10.)
To exit MD/AUX mode, you will automatically switch
out of MD/AUX mode when you select another source.
• For operation of the external equipment, refer to its In-
structions.
Recording the System’s Source
to External Equipment
You can record the System’s source to external equipment
which is connected to the MD/AUX-OUT or CD DIGITAL
OUT terminals of the System, such as cassette deck or MD
recorder, etc.
❏ First make sure that the external equipment is properly
connected to the System. (See page 7).
Play a CD or tune in to a station.
❏ The recording level is not affected by the VOLUME level
set by the System. Also it is not affected by the sound ef-
fects.
• For operation of the external equipment, refer to its In-
structions.
• During playing a video CD or using tuner, no signal is out-
put from the CD DIGITAL OUT terminals.
REMOTE CONTROL
VOLUME
FM MODE
MPX
DIMMER SLEEP
DISPLAY DOOR SLIDE
PLAY MODE REPEAT CANCEL
AHB PRO
TONE
CONTROL
CLOCK
/ TIMER
HIGHLIGHT
PBC ON / OFF
VCD NUMBER
SELECT
NEXTPREV
VCD NUMBER
VIDEO INTRO STILL
UP
SET
DOWN
MD
/
AUX FM
/
AM
CD
FADE MUTING
ON SCREEN
MD/AUX
MD/AUX
FS-SD58V_A4.fm Page 20 Thursday, September 28, 2000 4:52 PM