Filter
Top Products
11
English
Using the Tuner
You can listen to FM and AM stations. Stations can be tuned
in manually, automatically, or from preset memory storage.
❏ Before listening to the radio:
• Make sure that both the FM and AM antennas are cor-
rectly connected. (See pages 4 and 5).
Setting the AM Tuner Interval Spacing
When shipped, the AM tuner interval is set to 9 kHz spacing.
You can change it to 10 kHz spacing.
● Preparation to setting:
Turn on the power and press the FM/AM button to select
AM mode.
To select 10 kHz intervals, while holding down the 7
button on the Unit, press the VOLUME + button on the
Unit. “AM 10 kHz” will appear on the display (at the same
time, the 100 kHz spacing is selected for FM broadcast).
To select 9 kHz intervals, while holding down the 7 but-
ton on the Unit, press the VOLUME − button on the Unit.
“AM 9kHz” will appear on the display.
[10 kHz Intervals] [9 kHz Intervals]
• When you change the setting, the preset stations are
erased. You will need to preset the stations again. (See
page 12.)
One Touch Radio
Just press the FM/AM button to turn on the System and start
playing the station you were last tuned to.
❏ You can switch from any other sound source to the radio
by pressing the FM/AM button.
Tuning In a Station
1
Press the FM/AM button.
The Band and Frequency you were last tuned to appear
on the display.
(If the last station was selected using the preset number,
the preset number appears first.)
Each time you press the button, the band alternates be-
tween FM and AM.
2
Select a station using one of the follow-
ing methods.
● Manual Tuning
Press the 4 or ¢ (DOWN or UP) button on the
Unit or the Remote Control repeatedly to move from
frequency to frequency until you find the station you
want.
OR
● Auto Tuning
If you press and hold the 4 or ¢ (DOWN or UP)
button on the Unit or the Remote Control for one sec-
ond or more, the frequency changes down, or up, au-
tomatically until a station is found.
OR
● Preset Tuning using the Remote Control
(Possible only after presetting stations)
Select the desired preset number using the > and < but-
ton on the Remote Control. After 1 second the display
will show the preset number’s band and frequency.
Example:
Press the > button until the preset number 12 “P12”
appears. (Each time you press the > button, the preset
number will be increased by 1.)
REMOTE CONTROL
VOLUME
FM MODE
MPX
DIMMER SLEEP
DISPLAY DOOR SLIDE
PLAY MODE REPEAT CANCEL
AHB PRO
TONE
CONTROL
CLOCK
/ TIMER
HIGHLIGHT
PBC ON / OFF
VCD NUMBER
SELECT
NEXTPREV
VCD NUMBER
VIDEO INTRO STILL
UP
SET
DOWN
MD
/
AUX FM
/
AM
CD
FADE MUTING
ON SCREEN
STEREO
MONO
FM MODE
DOWN
¢
4
UP
FM/AM
Band display, Frequency display, Preset channel
FM mode
indicators
FM/AM
4
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
¢
SET
PRESET
TUNING +, −
7
VOLUME +, −
><
VOLUME
VOLUME
FM
/
AM
FMAM
FM/AM
FMAM
(on the Remote Control)
(on the Unit)
(After 1 second)
or
FS-SD58V_A1.fm Page 11 Thursday, September 28, 2000 4:49 PM