JVC THD60 Home Theater System User Manual


 
10
How to use the number buttons
To select 3: Press 3.
To select 10: Press 10.
To select 14: Press h10, 1, then 4.
To select 24: Press h10, 2, then 4.
To select 40: Press h10, 4, then 0.
To select 114: Press h10, h10, 1, 1,
then 4.
Set the remote control
mode before
operation.
Listening with headphones
When the headphones is connected, the System
automatically deactivates the speakers and cancels the
surround mode ( 13) temporarily.
“H.PHONE” appears on the display.
STANDBY lamp:
Goes off when the System is turned on.
Lights when the System is turned off.
Point at the remote sensor
directly.
Display
To change the display
brightness
A XM Satellite Radio indicators ( 25)
XM: Lights when “XM” is selected as the source.
: Shows XM Satellite Radio signal strength.
CAT: Lights while selecting a channel by category.
B Digital audio signal format indicators
C FM/AM tuner source indicators ( 27)
D Lights when one of the surround modes is activated.
( 13)
E Frequency unit indicators for FM/AM
F Source signal and speaker signal indicators
(front left), (center), (front right), (low
frequency effect), (surround left), (surround
right), (monaural surround): Light when the signal
comes in for the digital input or when the System is
ready to receive the signal for the analog input.
SW (subwoofer): Always lights.
_: Lights while reproducing the channel’s sound
through the corresponding speaker.
G Speaker position mode indicators ( 12)
H Lights when both the System and the TV (with HDMI
connection) are ready to communicate each other.
I Scanning mode indicators ( 14)
HD: Lights when “720P” or “1080I” is selected.
PRGR.: Lights when the progressive scanning mode is
activated.
J Digital device indicators
K File type indicators
L Lights when the chapter (CHAP.) or track (TRK)
number is displayed.
M Lights when selecting a program number (PG) or
playlist number (PL) of a DVD VR disc by using
TITLE/GROUP. ( 17)
N Special playback indicators for DVD Audio
(20)
BONUS: Lights when a bonus group is detected.
B.S.P: Lights when browsable still pictures are
detected.
O FM reception mode indicators (MONO: monaural /
ST: stereo) ( 27)
P Play mode indicators (PRG: program play / RND:
random play) ( 18)
Q Lights when the System memorizes the position where
the playback is interrupted. ( 16)
R Repeat mode indicators ( 18, 21)
Be sure to turn down the volume
before connecting or putting on the
headphones.
Basic and common operations
TH_D60WM[J].book Page 10 Friday, February 23, 2007 3:19 PM