9
Connection for “VIDEO2”—TH-D60
Select “VIDEO2” as the source ( 11) for
playing a component connected as follows.
Video connection
*
Connect an external component with the same kind of cable
as the one used to connect TV. ( 8)
Audio connection
Connecting a digital component
The initial setting for the audio input setting is “OPT.”
When using COAXIAL jack, change the setting to
“COAX” before playing back. ( 14)
Connecting an analog component
Select “2CH” as the audio input setting before
playing back. ( 14)
Connection for “VIDEO” —TH-D50/TH-
D5/TH-D4
Select “VIDEO” as the source ( 11) for playing
a component connected as follows.
Video connection
*
Connect an external component with the same kind of cable
as the one used to connect TV. ( 8)
Audio connection
Connecting a digital component
Select “OPT” as the audio input setting before
playing back. ( 14)
Connecting an analog component
Select “2CH” as the audio input setting before
playing back. ( 14)
Plug in the System only after all the connections have
been completed.
Composite video cord*
(not supplied)
or
S-video cord
*
(not supplied)
A From composite video output
B From S-video output
Align the
5 marks.
VCR, etc.
DBS (Direct
Broadcasting
Satellite)
tuner, etc.
Digital coaxial cable
(not supplied)
A From digital coaxial output
B From digital optical output
Digital optical cable
(not supplied)
From audio output
RCA pin plug cord
(not supplied)
VCR, etc.
Connecting the AC power cord
Composite video cord*
(not supplied)
or
S-video cord
*
(not supplied)
A From composite video output
B From S-video output
Align the
5 marks.
VCR, etc.
DBS (Direct
Broadcasting
Satellite)
tuner, etc.
From digital optical output
Digital optical cable
(not supplied)
From audio output
RCA pin plug cord
(not supplied)
VCR, etc.
Available video output terminals for each source
Source
DVD USB iPod
VIDEO2/
VIDEO
VIDEO1
Terminal
HDMI √√ √
COMPONENT √√
S-VIDEO √√√√
VIDEO (Composite video) √√√√
Do not connect the power cord
until all other connections have
been made.
Body_TH-D456[JC].fm Page 9 Thursday, March 1, 2007 2:26 PM