Filter
Top Products
44
Operating other devices using the remote control
You can operate your TV, video cassette recorder
(VCR) and digital broadcast satellite (DBS) using
the remote control of this system.
1 Slide the remote control
mode selector to [TV].
2 Hold down [TV F].
• Hold down [TV F] until you finish step 4.
3 Press [ENTER] and release.
4 Press number buttons to enter the
manufacturer code.
Examples:
For a Hitachi TV: Press [1], then [0].
For a Toshiba TV: Press [0], then [8].
When the manufacturer of your TV has 2 or more
codes, select the manufacturer codes in turn and
find the one that operates the TV and the remote
control properly.
5 Release [TV F].
NOTE
• Manufacturer codes are subject to change with-
out notice. You may not be able to operate the
TV produced by the manufacturer.
• After replacing the batteries of the remote con-
trol, set the manufacturer code again.
Operating a TV using the
remote control
Manufacturer Code
JVC 01
Hitachi 10
Magnavox 02
Mitsubishi 03
Panasonic 04, 11
Philips 15
RCA 05
Samsung 12, 18, 19, 20, 21
Sanyo 13, 14
Sharp 06, 16, 17
Sony 07
Toshiba 08
Zenith 09
Setting the manufacturer code
Remote control
mode selector
Number
buttons/
TV RETURN/
100+
Operating other devices using the remote control
(Continued on the next page)
DD-831[A_Ux]-09.fm Page 44 Friday, September 8, 2006 12:28 PM