Filter
Top Products
21
Listening to radio broadcasts
* For the number button usage, refer to “Using the
number buttons” on page 17.
■ CAUTION
• Slide the remote control mode
selector to [AUDIO].
AM stations are spaced 9 kHz apart in some coun-
tries and 10 kHz in other countries.
■When the main unit is turned off
To select 9 kHz spacing, while holding down
[VOLUME –] on the main unit, press F on the
main unit to turn on the power. “AM 9 kHz STEP”
appears in the display window.
To select 10 kHz spacing, while holding down
[VOLUME +] on the main unit, press F on the
main unit to turn on the power. “AM 10 kHz STEP”
appears in the display window.
NOTE
• When the spacing is switched, the preset radio
station memory is erased.
1 Press [FM/AM] to select “FM” or
“AM” in the display window.
• Each time you press [FM/AM], the band tog-
gles between “FM” and “AM”.
• Repeatedly pressing [SOURCE] on the
main unit can also select a radio broadcast
as the source.
Example: Display when an FM radio broadcast
is received
Number
buttons*
Setting the AM tuner spacing
Selecting a radio station
Stereo indicator
Preset number (Refer to page 22.)
Frequency (M: MHz/k: kHz)
Remote control
mode selector
Listening to radio broadcasts
DD-831[A_Ux]-05.fm Page 21 Monday, September 25, 2006 2:59 PM