Filter
Top Products
7
ENGLISH
1
Turn on the power and select the
source.
When you press the button
for the first time, the power
comes on. Then each time
you press the button, the
source changes as follows:
* If a disc is not in the loading slot, you cannot
select CD as the source to play.
** Without connecting the DAB tuner or CD
changer, you cannot select it as the source to
play.
To operate the tuner (FM or AM),
see pages 8 – 10.
To play a CD,
see pages 17 – 19.
To play an MP3 disc,
see pages 22 – 26.
To operate external components
(AUX INPUT and LINE INPUT),
see pages 37 – 38.
To operate the CD changer,
see pages 39 – 40.
To operate the DAB tuner,
see pages 41 – 44.
2
Adjust the volume.
Note:
After adjusting the volume, you can push in the
control dial to avoid unintended operations.
To use it again, push the control dial again to
make it come out.
3
Adjust the sound as you want.
(See page 27.)
To drop the volume in a moment
Press and hold /ATT while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press and
hold the button again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold SOURCE until “SEE YOU”
appears on the display.
To increase the volume.
BASIC OPERATIONS
To decrease the volume.
2
1
Note:
When you use this unit for
the first time, set the built-in
clock correctly, see page 30.
Volume level indicator
Volume level appears.
FM TUNER
*
CD PLAY
DAB TUNER
CD CHANGER
LINE INPUT
AUX INPUT
AM TUNER
**
**
EN07-07.KD-SH99R[E]f 4/16/01, 9:15 AM7