Filter
Top Products
ENGLISH
43
“P 1” flashes for a while.
Storing DAB services in
memory
You can preset up to 6 DAB services in each DAB
band (DAB1, DAB2 and DAB3) manually.
1
Select the DAB tuner.
When you select a source,
the power automatically
comes on.
Each time you press the
button, the source changes
as described on page 7.
2
Select the DAB band (DAB 1, DAB 2
or DAB 3) you want.
Each time you press and
hold the button for more than
1 second, the DAB band
changes as follows:
3
Tune into an ensemble you want.
4
Select a service of the ensemble you
want.
1 Press M/B (mode/band).
2 Press and hold ¢
or 4 to select a
service you want.
5
Press and hold the number button
(in this example, 1) you want to
store the selected service into for
more than 2 seconds.
6
Repeat the above procedure to
store other DAB services into other
preset numbers.
Notes:
• A previously preset DAB service is erased when a
new DAB service is stored in the same preset
number.
• Preset DAB services are erased when the power
supply to the memory circuit is interrupted (for
example, during battery replacement). If this
occurs, preset the DAB services again.
(DAB 1)
(DAB 2)
(DAB 3)
D1
D2
D3
EN41-44.KD-SH99R[E]f 4/17/01, 8:38 AM43