Filter
Top Products
44
ENGLISH
LVT1008-001A [E/EX]
4
Select a service you want to listen
to.
1 Press BAND MODE (M).
“MODE” appears on the
display.
2 Press ¢ or 4 to
select a service you want,
while “MODE” is still on the
display.
To change the display information while
tuning in to an ensemble
Normally service name is shown on the display.
If you want to check the ensemble name or its
frequency, press DISP (D).
Each time you press the button, the following
information appears for a while on the display.
To tune in to a particular ensemble
without searching:
1 Press SOURCE ATT to select DAB tuner as
the source.
2 Press BAND MODE (M) repeatedly to select
the DAB band (DAB1, DAB2 or DAB3).
3 Press and hold ¢ or 4 for more
than 1 second.
4 Press ¢ or 4 repeatedly until the
ensemble you want is reached.
• If you hold down the button, the ensemble
keeps changing until you release the button.
5 Select a service you want to listen to.
1 Press BAND MODE (M).
“MODE” appears on the display.
2 Press ¢ or 4 to select a service
you want, while “MODE” is still on the
display.
Storing DAB services in
memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2 and DAB3) manually.
1
Select the DAB tuner (DAB1 – 3).
1 Press SOURCE ATT to select
DAB tuner as the source.
2 If necessary, press and hold
BAND MODE (M) repeatedly
to select the DAB band
number (DAB1, DAB2 or
DAB3).
Each time you press and hold the button,
the DAB band changes as follows:
2
Tune in to an ensemble you want.
3
Select a service of the ensemble you
want.
1 Press BAND MODE (M).
“MODE” appears on the
display.
2 Press ¢ or 4 to
select a service you want,
while “MODE” is still on the
display.
M
BAND
MODE
Service name
Channel number
Ensemble name
Frequency
D1
(DAB1)
D2
(DAB2)
D3
(DAB3)
SOURCE
ATT
M
BAND
MODE
M
BAND
MODE
EN43-46KD-LX555R[E]f.p65 02.12.12, 8:4744