Filter
Top Products
29
ENGLISH
LVT1008-001A [E/EX]
Selecting preset sound modes
(iEQ: i-equalizer)
You can select a preset sound mode suitable to
the music genre.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step
1
again.
1
Press BAND MODE (M).
“MODE” appears on the
display.
2
Press EQ (equalizer) while “MODE” is
still on the display.
The last selected sound mode is
called up.
3
Select the sound mode you want.
As you turn the control
dial, the sound modes
change as follows:
FLAT O Hard Rock O R&B*O POP O
JAZZ O Dance Music O Country O
Reggae O Classic O USER 1 O USER 2 O
USER
3 O (back to the beginning)
* Rhythm and Blues
To cancel the sound mode, select “FLAT” in
step
3
.
Note:
For details about the preset settings of each sound
mode, see page 49.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable items
change as follows:
Indication To do: Range
FAD*
1
Adjust the front R06 (Rear only)
and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker |
balance. R06 (Right only)
S. BASS*
2
Adjust the bass. 00 (min.)
|
07 (max.)
VOLUME
Adjust the volume.
00 (min.)
|
50 (max.)
*
1
If you are using a two-speaker system, set the fader
level to “00.”
*
2
The richness and fullness of the bass sound is
clearly maintained regardless of how low you set
the volume.
2
Adjust the level.
Note:
Normally the control dial works for volume
adjustment. So you do not have to select “VOLUME”
to adjust the volume level.
SOUND ADJUSTMENTS
Ex.: If you have selected “FLAT” previously
SEL
S
FAD
(fader)
BAL
(balance)
S.BASS
(super bass)
VOLUME
(volume)
M
BAND
MODE
1
7
EQ
To increase the level
To decrease the level
EN29-30KD-LX555R[E]f.p65 02.12.11, 16:3729