Filter
Top Products
21
ENGLISH
LVT1008-001A [E/EX]
Playing a CD Text
In a CD Text, some information about the disc
(its disc title, performer and track title) is
recorded.
You can show this CD Text information on the
display.
Select text display mode while playing a
CD Text.
Each time you press the button, the display
changes as follows:
Notes:
• The display shows up to 10 characters at one time
and scrolls if there are more than 10 characters.
See also “To select the scroll mode—SCROLL” on
page 33.
• When you press DISP (D) while playing a
conventional CD, “NO NAME” appears for the
disc title/performer and the track title.
To play back only intros (Track Intro Scan)
You can play back the first 15 seconds of each
track sequentially.
1 Press BAND MODE (M) while
playing a CD. “MODE”
appears on the display.
2 Press INT (intro scan), while
“MODE” is still on the display.
Each time you press the
button, track intro scan mode
turns on and off alternately.
When track intro scan mode is turned on, the INT
indicator lights up on the display.
Prohibiting disc ejection
You can prohibit disc ejection and can lock a disc
in the loading slot.
While pressing SOURCE ATT, press and hold
OFF 0 for more than 2 seconds. “NO EJECT”
flashes on the display for about 5 seconds, and
the disc is locked and cannot be ejected.
Note:
If you press OFF 0 while disc ejection is prohibited,
the control panel moves down, but the disc cannot be
ejected. (“NO EJECT” appears on the display.)
To move up the display panel, press ¢ or
4 .
To cancel the prohibition and unlock the disc,
press and hold OFF 0 for more than 2 seconds
again, while pressing SOURCE ATT. “EJECT
OK” flashes on the display for about 5 seconds,
and the disc is unlocked.
M
BAND
MODE
INT
10
INT indicator
DISP
D
Track title indicator
Disc Title / Performer
Track Title
( lights up on the display)
Elapsed playing time and
Current track number
EN19-21KD-LX555R[E]f.p65 02.12.11, 16:3321