JVC CA-UXH33 CD Player User Manual


 
22
Using the Timers
There are four timers availableDaily Timer,
Recording Timer, Snooze Timer, and Sleep Timer.
Before using the timers, you need to set the units
clock (see page 10).
Using Daily Timer and Recording Timer
You can set the timer whether the unit is on or off.
How the timer actually works
When the on-time comes, the unit automatically turns
on (the
[timer] indicator flashes just before the on-
time and continues flashing while the timer is
operating). Then, when the off-time comes, the unit
automatically turns off (standby).
The timer setting remains in memory until you change
it.
When the
(timer) indicator is lit on the display,
the timer acts as the Daily Timer. Once the timer has
been set, it will be activated at the same time
everyday until the timer is turned off.
When the
(timer) and the REC indicators are lit
on the display, the timer acts as the Recording Timer.
After the timer-recording finishes, the details of the
setting remain stored but the timer is turned off.
Before you start...
When using
TUNER as the source to play, make
sure to select the desired station before turning off the
power.
There is a time limit in doing the following steps. If
the setting is canceled before you finish, start over
from step
1
.
1
Press CLOCK/TIMER
(or TIMER/SNOOZE on
the unit).
The (timer) and the ON
indicators light up and the
current on-time flashes on the
display.
The unit enters on-time setting mode.
2
Set the on-time when you want the unit
to turn on.
On the remote control:
1) Press
UP or DOWN to set
the hour, then press
CLOCK/TIMER.
2) Press
UP or DOWN to set
the minute, then press
CLOCK/TIMER.
On the unit:
1) Press ¢ or 4 to set the
hour, then press TIMER/
SNOOZE.
2) Press ¢ or 4 to set the
minute, then press
TIMER/SNOOZE.
The OFF indicator lights up and the unit enters
off-time setting mode.
3
Set the off-time when you want the unit
to turn off (standby).
On the remote control:
1) Press
UP or DOWN to set the hour, then
press CLOCK/TIMER.
2) Press UP or DOWN to set the minute,
then press CLOCK/TIMER.
On the unit:
1) Press ¢ or 4 to set the hour, then press
TIMER/SNOOZE.
2) Press ¢ or 4 to set the minute, then press
TIMER/SNOOZE.
The unit enters the timer selecting mode.
ON
OFF
UP
DOWN
CLOCK
/ TIMER
TIMER/SNOOZE
Continued
CLOCK
/ TIMER
TIMER/SNOOZE
EN20-28_UX-H30[B]f.pm6 02.12.26, 1:38 PM22