Filter
Top Products
17
Playing back sources from external devices
1 Press [AUDIO IN].
• “AUDIO IN” is selected as the source in the
display window.
2 Start playback on the connected
device.
3 Adjust the volume or the sound
settings for your preference.
• Refer to page 11.
NOTE
• Before connecting or disconnecting an external
device, press [VOLUME ] repeatedly to set the
volume of this system to the minimum. You can
also use the [VOL –] control on the main unit.
You can select the gain of the signal from the
[AUDIO IN] terminal.
Press [DVD/AUDIO IN LEVEL] while
holding down [SHIFT].
• Each time you press [DVD/AUDIO IN LEVEL],
the signal gain setting toggles between “NOR-
MAL” and “HIGH” in the display window.
• Select “NORMAL” for normal operation.
Playing back sources from
external devices
Selecting the signal gain
Playing back sources from external devices
UX-GN7V[US]EN.book Page 17 Monday, January 19, 2009 11:51 AM