JVC CA-MXS5RMD Stereo System User Manual


 
– 51 –
There are three timers available — Recording Timer, Daily
Timer, and Sleep Timer.
Before using these timers, you need to set the clock built in
the unit. (See page 11.)
Using Recording Timer
With Recording Timer, you can make an unattended
recording.
You can set Recording Timer whether the unit is turned
on or off.
To correct a mis-entry any time during the setting
process, press CANCEL.
To cancel the setting any time during process, press
CLOCK/TIMER.
How Recording Timer actually works
The unit automatically turns on, turns off the volume, and
starts recording on the MD when the timer-on time comes.
Then, when the timer-off time comes, the unit
automatically turns off (stands by).
Recording Timer works only once, but the timer settings
remain stored in memory until you reset them or disconnect
the AC power cord.
On the unit ONLY:
1
Press CLOCK/TIMER repeatedly until “REC
TIMER SET UP” appears in the main display.
The REC indicator starts flashing on the display.
Each time you press the button, the timer mode
changes as follows:
2
Push the joy control rightward (¢ ) or leftward
(4
) to set the hour of the timer-on time, then
press SET.
3
Push the joy control rightward (¢ ) or leftward
(4
) to set the minute of the timer-on time, then
press SET.
4
Push the joy control rightward (¢ ) or leftward
(4
) to set the hour of the timer-off time, then
press SET.
5
Push the joy control rightward (¢ ) or leftward
(4
) to set the minute of the timer-off time, then
press SET.
6
Push the joy control rightward (¢ ) or leftward
(4
) to select the source.
The source changes as follows:
FM: Tunes into an FM station.
= Select a preset station (see below).
AM: Tunes into an AM (MW/LW) station.
= Select a preset station (see below).
TAPE*: Selects “TAPE” as the source.
= Make the external equipment ready for
playback.
AUX DIGITAL*: Selects “AUX DIGITAL” as the
source.
= Make the external digital equipment
ready for playback.
* To operate these equipment with the Recording
Timer, they also need to have the timer function.
7
If you have selected “FM” or “AM” as the source in
the above step, select a preset number.
Push the joy control downward (1
) or upward
(¡
) to select a preset station, then press SET.
If you press SET without selecting a preset station,
the last received station will be tuned in when the
timer recording starts.
If you have selected “TAPE” or “AUX DIGITAL as
the source in the above step, simply press SET.
The REC indicator stops flashing, and remains lit.
FM AM
TAPE
AUX DIGITAL
DAILY TIMER
DAILY TIMER
SET UP
REC TIMER
SET UP
Canceled
REC TIMER
CLOCK SET
EN50-54.CA-MXS5RMD[B]/f 99.9.14, 1:55 AM51