Filter
Top Products
9
To drop the volume in a moment
Listening to the Radio
To select the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other
countries use 10 kHz spacing.
1
Select AM.
2
Select the appropriate AM space interval for your
area.
To select the band (FM/AM)
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency search stops.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually,
press either button.
If the FM station has poor reception
To preset stations
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset.
2
Select a preset number.
3
Store the station.
To tune in to a preset station
1
Select the band (FM or AM).
2
Select the preset number for the preset station.
• You can also use 1
or ¡
buttons.
To restore the volume,
press again, or
adjust the volume level.
Remote
ONLY
INFO
Main Unit
ONLY
FM
AM
(While holding...)
(10 kHz interval)
(9 kHz interval)
FM AM
Remote
ONLY
Increases the frequencies.
Decreases the frequencies.
1 sec.
The MONO indicator lights on the display.
Reception will improve though stereo
effect is lost—monaural reception mode.
To restore the stereo effect,
press the
button again (the MONO indicator goes
off).
Examples:
To select number 5, press 5.
To select number 10, press 10.
To select number 15, press h
10,
1, then 5.
To select number 30, press h
10,
3, then 0.
Remote
ONLY
FM AM
MX_DK5_3_1.book Page 9 Tuesday, February 7, 2006 11:49 AM