JVC AX-V5BK Stereo Amplifier User Manual


 
English
Page 25
Using the Remote Control
You can operate JVC audio and video components with the amplifier’s remote control, since control signals for JVC components are preset in
the remote control.
To operate these components with the remote control, first select a source with the source buttons on the remote control. Then, operate that source
using the remote control.
IMPORTANT:
To operate JVC audio components using this remote control:
You need to connect JVC audio components through the COMPU LINK-3 SYNCHRO jacks (see page 7) in addition to the
connections using cables with RCA pin plugs (see page 6).
Aim the remote control directly at the remote sensor on the amplifier.
After pressing TUNER, you can perform the following operations:
1 — 10, +10 Selects a preset channel number directly
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.
For channel number 30, press +10, +10 then 10.
RDS operating buttons
PTY SEARCH Starts and ends searching a broadcast using the RDS.
PTY SELECT +/– Selects a program type.
DISPLAY Changes the RDS display mode.
After pressing CD, you can perform the following operations on a CD player:
3 Starts playing
4 Returns to the beginning of the current (or previous) track
¢ Skips to the beginning of the next track
7 Stops playing
8 Pauses. To resume playing, press 3.
1 — 10, +10 Selects a track number directly
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10
After pressing CD-DISC, you can perform the following operations on a CD player-changer:
1 — 6, 7/P Select the number of a disc installed in a CD player-changer. Then continue to
operate the CD player as described above.
After pressing TAPE, you can perform the following operations on a cassette deck:
3 Starts playback
4 Fast winds a tape from right to left
¢ Fast winds a tape from left to right
7 Stops operation
8 Pauses. To resume playing, press 3.
TV
/VIDEO
CH
+
CH
456
123
TV VCR AUDIO
TEST DELAY
PRESET
SEA MODE
SURR MODE
CD 7/P 8 9
10 +10
TAPE
TUNER
SEA
ON/OFF
SURROUND
ON/OFF
VCR TV
TV CONTROL
RM-SAV5RU REMOTE CONTROL
–+
VIDEO
ONE TOUCH
OPERATION
VOLUME
–+
CENTER
–+
REAR
CD-DISC
AUDIO
CONTROL
/I
VOLUME
PHONO
–+
MUTE
PTY SEARCH
DISPLAY
PTY SELECT
–+
AX-V5BK(EF)_0023-001A_En 97.4.24, 1:15 PM25