Filter
Top Products
English
Page 12
SETTING
Basic Settings
Some of the following settings are required after connecting and positioning your speakers in your listening
room, while others will make operations easier.
Adjusting the Front Speaker Output Balance
If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output
balance.
On the front panel only:
1. Press SETTING so that the Control
%%
%%
% /
fifi
fifi
fi /
@@
@@
@ /
##
##
# buttons work for adjusting the balance.
The lamp above the button lights up.
2. Press Control
%%
%%
% /
fifi
fifi
fi until “BALANCE” appears on the display.
3. Press Control
@@
@@
@ /
##
##
# to adjust the balance.
• Pressing Control @ decreases the right channel output.
• Pressing Control # decreases the left channel output.
Listening at Low Volume (Loudness)
Human ears are not sensitive to bass at low volume. To compensate for this, the loudness function
automatically boosts the bass level as you lower the volume.
On the front panel only:
1. Press SETTING so that the Control
%%
%%
% /
fifi
fifi
fi /
@@
@@
@ /
##
##
# buttons work for setting the loudness.
The lamp above the button lights up.
2. Press Control
%%
%%
% /
fifi
fifi
fi until “LOUDNESS” appears on the display.
3. Press Control
@@
@@
@ /
##
##
# to set the loudness function to “ON” or “OFF.”
• Select “ON” to activate the loudness function.
The LOUDNESS indicator lights up on the display.
• Select “OFF” to cancel it.
The indicator goes off.
Using the Sleep Timer
Using the Sleep Timer, you can fall asleep to music and know the amplifier will turn off by itself rather than
play all night.
On the front panel only:
1. Press SETTING so that the Control
%%
%%
% /
fifi
fifi
fi /
@@
@@
@ /
##
##
# buttons work for setting the Sleep Timer.
The lamp above the button lights up.
2. Press Control
%%
%%
% /
fifi
fifi
fi until “<SLEEP>” appears on the display.
3. Press Control
@@
@@
@ /
##
##
# to set the shut-off time.
Each time you press the button, the shut-off time on the display changes as follows, and the SLEEP
indicator lights up on the display.
2010 30 40 50 60 70 80
0
SETTING
(Canceled)
SETTING
Continue to the next page
AX-V5BK(EF)_0023-001A_En 97.4.24, 1:15 PM12