Filter
Top Products
26
English
Available Characters
Uppercase and Symbols
(blank)
Lowercase and Symbols
(blank)
Numerals
• During Synchronized Recording:
You can assign the disc title, and 15 track titles one after
another as recording goes on. The track titles you have
entered are automatically assigned to the tracks recorded
on the MD in sequential order. If you enter 16th track
title or more, they are ignored.
Changing the Title
You can make a correction or change the title.
1
Follow steps 1 to 4 of pages 24 to 25.
2
Rotate MULTI JOG dial or press < / > button to
select the character you want to correct.
• Make sure that the character you want to change is
blinking.
3
Press CANCEL button to delete the character you
have selected in the step 2.
4
Enter the correct character.
a) Press DISPLAY/CHARA. button to select the
character set you want.
b) Rotate MULTI JOG dial (or press < / > button) to
select the correct character, then press SET button.
5
Repeat steps 2 to 4 to correct another characters.
6
Press ENTER button twice to finish correcting the
title.
• If you want to cancel the correction, press CANCEL
button after pressing ENTER button once in this step.
7
Press 0 (eject) button to eject the MD.
“WRITING” appears while the editing you have made
is being recorded on the MD.
To erase all the characters
Press CANCEL button repeatedly in step 3 above
to erase all the characters, then go to step 6.
EN19-26.XM-G6[J]/2b 99.12.09, 17:5726