Jensen JMC-180 Stereo System User Manual


 
E-11
will automatically show the programmed tracks one by one in their correct sequence starting from the first.
At the end of program review, the Program No.,“01”, and the PROGRAM INDICATOR, “PROG” will both
flash in the LCD DISPLAY.
6. Press the PLAY/PAUSE
 BUTTON to complete and start program play in the
programmed sequence.
7. You may tap SKIP FORWARD "" BUTTON to go directly to other tracks ahead
during program play and press SKIP BACKWARD "" BUTTON twice to go back to
previous track(s).
8. You may use the REPEAT function to repeatedly play a certain track (Repeat 1) or all
tracks in the program (Repeat All).
9. The Player will stop when all the programmed tracks have been played through once.
To replay program play, press the PROGGRAM Button followed by the PLAY/ PAUSE
 Button.
10. To cancel program play, press the STOP
BUTTON twice while program play is
running or open the CD DOOR in stop mode.
11. To turn the Player off, press the POWER BUTTON. The LCD DISPLAY backlight will go “off”.
AUXILIARY (AUX) OPERATION
You can play other music sources (iPod, MP3 player or other digital audio player) through the speakers of this
System by connecting the AUX IN Jack to your external player’s LINE OUT jack or headphone jack.
1. The AUX IN and PHONES JACKS are covered by the DOOR (#16). Slide the DOOR downwards
2. Plug one end of an audio cable (Not included) into the AUX IN Jack and the other end of the cable to the line
out or headphone jack of your digital audio player.
3. Set the FUNCTION SELECTOR to the “AUX” position.
4. Press the POWER BUTTON to turn on the System. The LCD DISPLAY goes “On”.
5. Play your digital audio player.
6. Adjust the VOLUME on the external audio player and the System until you reach a comfortable listening level.
7. Turn the System and your audio player off when you have finished listening and then unplug the audio cable.
USING HEADPHONES (NOT INCLUDED)
Inserting the plug of your headphones into the System’s PHONES JACK will enable you to listen to the CD, radio
or other music sources in private. When using headphones, the speakers will be automatically disconnected.
ALARM OPERATION
SETTING THE WAKE UP TIME
1. Press and hold the AL SET BUTTON and repeatedly press the HOUR BUTTON to set the correct wake up
Hour.