iSymphony M1 Stereo System User Manual


 
42
SLEEP Timer (On Remote Control Only)
This system includes a programmable Sleep Timer that allows you to fall asleep to
between 10 and 90 minutes of music and then shuts the power ‘Off’ automatically.
To operate the sleep timer:
1.) Turn the system ‘On’ and operate either the TUNER or CD function as usual.
2.) Adjust the VOLUME control to the desired level. Remember that the level you
select for the sleep to music function is the same level you will hear when the
timer turns the system on in the morning.
3.) Press the SLEEP button on the remote control.
4.) The display will show SLEEP 90” indicating that
the sleep timer will shut the power off after 90
minutes.
Continue pressing the SLEEP button to decrease the amount of sleep timer
operation.
Each time you press the SLEEP button you subtract 10 minutes to the sleep
timer. The minimum sleep timer operation is 10 minutes.
5.) After a few seconds the Sleep Time display
disappears and the normal Tuner or CD display
returns, but the small SLEEP indicator remains
in the display.When the Sleep Timer counts down
to “00”, the power shuts off automatically.
Notes:
You can shut the unit off manually before the Sleep Timer counts down to “00”
by pressing the STANDBY/ON button at any time.
If you are falling asleep to CD, the system will only operate until the CD ends.
If you set the Sleep Timer for 90 minutes but your CD is only 45 minutes long,
the music will stop after 45 minutes.