Filter
Top Products
25
Programmed Playback
The Programmed Playback feature allows you to program a total of up to 64 tracks
in any desired order. You may pr ogram the same track to play several times within
a program sequence if desired.
Note: You cannot program tracks during playback. If a disc is playing press
the STOP button first to stop pla yback before beginning the programmin g
steps below.
1.) Load the disc inthe player and wait until the player has read the Tableof Contents
of the disc.
2.) Press the PROGRAM/CLOCK button on the remote control.
The PRG indicator, Program Memory “P- 01” and
Trac k “00” will appear in the display .
3.) Then press the SKIP/TUNING + or – buttons to
select the first track on the disc to be programmed.
(Example: Track 07).
4.) Press the PROGRAM/CLOCK button again to
enter Track 07 in program memory #1.
The program memorynumber advances to“P- 02”.
5.) Repeat steps 3 and 4 selecting the desired Track number each time until you
have entered up to 64 tracks in the CD program memory.