Filter
Top Products
21
5.) Press the
OPEN/CLOSE button to close the CD tray.
The display will show flashing “READ” as the
player reads the Table Of Contents on the
disc.
After reading the disc the display will show
the total tracks and playing time.
Note:
The reading time may be even longer if you are using CD-RW (rewritable)
discs. This is normal and n ot an indication of any problem with your unit.
6.) Press the PLAY/PAUSE button to begin
playback.
“ESP” indicator begins flashing in the display
and stops flashing after a while.
You may turn the “ESP” function “Of f” or “O n” by pressing the
ID3/FM ST./ESP
button
on the remote control.
7.) Adjust the VOLUME, DBBS and EQ controls as desired.
8.) Playback will continue until all tracks on the disc have been played, then the
player stops and the display shows the total tracks number and playing time on
the disc.
To stop playback at any time, press the STOP button.
9.) If you are finished listening, press the OPEN/CLOSE button to open the CD
tray, remove your disc from the player, re-close the tray and press the
STANDBY/ON button to return the system to the Standby (Off) mode.