Filter
Top Products
7
3.2. iOptron Customer Service
If you have any question concerning your mount, contact
iOptron Customer Service Department. Customer
Service hours are 9:00 AM to 5:00 PM, Eastern Time,
Monday through Friday. In the unlikely event that the
mount requires factory servicing or repairing, write or call
iOptron Customer Service Department first to receive an
RMA# before returning the mount to the factory. Please
provide details as to the nature of the problem as well as
your name, address, e-mail address, purchase info and
daytime telephone number. We have found that most
problems can be resolved by e-mails or telephone calls.
Please contact iOptron first to avoid returning the mount
for repair.
It is recommended to send technical questions to
support@ioptron.com
or call in the U.S. 1.781.569.0200.
3.3. Product End of Life Disposal
Instructions
This electronic product is subject to
disposal and recycling regulations that
vary by country and region. It is your
responsibility to recycle your electronic
equipment per your local environmental
laws and regulations to ensure that it will be recycled in
a manner that protects human health and the
environment. To find out where you can drop off your
waste equipment for recycling, please contact your local
waste recycle/disposal service or product representative.
Technical Specifications
Mount Single Axis Tracking EQ
Payload (Max.) 5kg + 3.5kg balanced
Mount weight 2.6kg w/o counterweight shaft
Body material Cast aluminum
Latitude adjustment range 0º ~ 60º
Azimuth adjustment range ± 10º
Worm wheel Φ88mm, 144 teeth aluminum alloy
Motor drive DC servo motor with optical encoder
Tracking R.A. automatic
Tracking speed Cel, 1/2 Cel, Solar, Lunar, N/S
Guiding port ST-4 compatible
Polar scope AccuAligning
TM
dark field illuminated (~6º FOV)
Level indicator Level bubble
Counterweight shaft Φ20x200 mm, stainless steel w/ 3/8”-16 threads
Counterweight 1.5kg
Power consumption 0.05A at maximum load
Power requirement DC 10 ~14V, 1Amp
Base connect 3/8”-16 threaded socket
Field Tripod
1.5”, 2 section stainless steel, 3.8kg (for #3500 only)
About 460~720mm in height, 510-800mm in length
Operation Temperature -10ºC ~40ºC
Warranty One year limited
Rev.1.0
iOptron reserves the rights to revise this instruction without notice. Actual color/contents/design may differ from those described in this instruction.