Filter
Top Products
4
Update procedure
1
Press RECEIVER followed by SETUP on
the remote controller.
Main menu will be displayed on TV screen.
Procedures thereafter can also be
p
erformed on
the AV receiver/controller by using its
SETUP, arrow, and ENTER buttons.
2
Go to “ Hardware Setup” menu.
3
Go to “ Firmware Update” menu.
Note that the Firmware Update option will be
grayed out about 50 seconds after the AV
receiver/controller is turned on. Please wait.
4
Select “ via NET” and press ENTER.
5
Select “ Update” and press ENTER.
Updating will begin.
As the u
p
datin
g
p
ro
g
resses, the TV screen ma
y
disappear depending on the program updated.
In this case, you can see the update progress
on the front display of the AV
receiver/controller. The TV screen will
reappear when you finish the update and turn
on the AV receiver/controller.
6
Message “ Complete!” appears on the front
display of the AV receiver/controller,
indicating that the update has been
completed.
7
Using ON/STANDBY on the front panel,
turn off and on the AV receiver/controller.
Do not use ON or STANDBY on the remote
controller.
Congratulations!! Now you have the latest
firmware on the AV receiver/controller.
(Go to the next page for troubleshooting.)