Filter
Top Products
42
First Time Setup—Continued
If you connect a video component to COMPONENT
VIDEO IN 1, 2, or 3, you must assign that input to an
input selector. For example, if you connect your DVD
player to COMPONENT IN 3, you must assign COM-
PONENT IN 3 to the DVD input selector.
To upconvert
(
*
)
composite video and S-Video sources
and output them from the component video output,
select the “- - -” option.
Here are the default assignments.
Notes:
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
• When the input selector assignment for the COMPO-
NENT VIDEO IN jacks is set to IN1, IN2 or IN3, the
“composite video to S-Video” and “S-Video to com-
posite video” conversions will not work.
Component Video Setup
Input selector Default assignment
DVD IN1
VIDEO 1 - - -
VIDEO 2 - - -
VIDEO 3 - - -
VIDEO 4 - - -
2
2, 3
1, 4
1
IN
OUT
(
*
)
Composite, S-Video
Composite, S-Video
Component
Component
1
Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select “1. Component
Video,” and then press [Enter].
The Component Video menu appears.
3
Use the Up and Down [ ]/[ ]
buttons to select an input selec-
tor, and use the Left and Right
[ ]/[ ] buttons to select:
IN1: Select if the video component
is connected to COMPO-
NENT VIDEO IN 1.
IN2: Select if the video component
is connected to COMPO-
NENT VIDEO IN 2.
IN3: Select if the video component
is connected to COMPO-
NENT VIDEO IN 3.
- - -: Select to output composite
video and S-Video sources
from the COMPONENT
VIDEO OUT.
4
Press the [Setup] button.
Setup closes.
1.Component Video
------------------------
a.DVD :IN1
b.VIDEO1 :---
c.VIDEO2 :---
d.VIDEO3 :---
e.VIDEO4 :---