Integra DTR-7.6/6.6 Stereo Receiver User Manual


 
56
Using the Listening Modes
For a description of each listening mode, see “About the
Listening Modes” on page 58.
Selecting on the AV Receiver
[Stereo] button
This button selects the Stereo listening mode.
Listening Mode [ ]/[ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
Selecting with the Remote Controller
[Stereo] button
This button selects the Stereo listening mode.
[Surround] button
This button selects the Dolby Digital and DTS listen-
ing modes.
Listening Mode [ ]/[ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
[Direct] button
This button selects the Direct listening mode.
[THX] button
This button selects the THX listening modes.
[All ST] button
This button selects the All Channel Stereo listening
mode.
Selecting the Listening Modes
The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial, optical, or HDMI).
Listening mode availability depends on the
format of the current input signal.
While a pair of headphones is connected,
you can only select the Mono, Direct, or Ste-
reo listening mode.
Stereo
Listening Mode
,
Stereo
Direct
THX
All ST
Surround