Insignia NS-CL1112 Headphones User Manual


 
16
Insignia NS-CL1112 Clock Radio with iPod Dock
www.insigniaproducts.com
See the iPod
®
instruction manual about the details of iPod
®
charging.
Troubleshooting
Notes
The connector plug is protected with a cover when it is
first purchased. Remove the cover before operating the
clock radio.
Do not carry the clock radio with your iPod
®
connected.
You might drop it and damage to the connector.
Do not touch or hit the iPod
®
terminal pins or the
connector pins directly. It might cause damage to the
connector part.
If the iPod
®
does not play correctly, update your iPod
®
software to the latest version. For details about updating
your iPod
®
, check on the Apple web site:
<http://www.apple.com>.
•iPod
®
is a trademark of Apple Inc., registered in the U.S.
and other countries.
We are not responsible for any loss of or damage to your
iPod
®
that might result from the use of this product.
Sound distortion may occur when playing back audio
sources with high recording levels. When distortion
occurs, we recommend that you turn off the iPod
®
equalizer. For information on operating the iPod
®
, see the
iPod
®
instruction manual.
Problem Cause/Solution
No power Make sure that the AC power adapter is fully inserted into the AC
power outlet.
Make sure that the AC power outlet is working.
Cannot
connect an
iPod
®
Make sure that the dock adapter you selected is compatible with
your iPod
®
.
Make sure that the dock adapter is correctly mounted on the clock
radio.
Cannot play
an iPod
®
Make sure that the iPod
®
is firmly inserted into the iPod
®
connector on your clock radio.
Make sure that the iPod
®
is working. Test it before trying to
connect it to the clock radio.
Make sure that the firmware in your iPod
®
is current. For more
information, go to http://www.apple.com/ipod/download.
Your clock radio cannot control first or second generation iPods
®
.
Cannot
charge an
iPod
®
Make sure that the iPod
®
is firmly inserted into the iPod
®
dock on
your clock radio.
Make sure that the AC adapter is plugged in and firmly connected
to the DC IN port on your clock radio.
NS-CL1112_09-0459_MAN_ENG_V4.fm Page 16 Friday, June 5, 2009 2:44 PM