Filter
Top Products
12
Insignia NS-AV511 Surround Sound Receiver
www.insigniaproducts.com
Initial Rocketboost setup
Insert the RF-RBCARD into the Rocketboost Module
Slot on the top of NS-AV511 receiver.
Setting up your surround sound receiver to send audio to
other Rocketboost receivers
To set up your surround sound receiver to send
audio to other Rocketboost receivers:
1 Press SETUP. The Setup Menu opens.
2 Press or to select 11. Rocketboost, then
press ENTER. The Rocketboost menu opens.
3 Press or to select Send Wireless Audio,
then press ENTER. The Send Audio menu opens.
4 Press or to select the Sender you want
(Front, Surround, or Subwoofer), then press
or to Enable or Disable the selected sender.
Establishing communications with other Rocketboost
products
To connect to a Rocketboost wireless network:
1 Press the Power button on your surround sound
receiver to turn it on.
2 Press SETUP. The Setup Menu opens.
Note
This is only required if you are using Rocketboost™
for your wireless surround sound, wireless subwoofer,
or if you are sending the front left/right speaker
audio signals to Rocketboost receivers in other
rooms of your house.
Setup Menu
1. HDMI Input
2. Component
3. Digital Audio
4. Sp Config
5. Sp Distance
6. Level Cal
7. Audio Adjust
8. Source Setup
9. Hardware
10. HDMI Setup
11. Rocketboost
Rocketboost
Send Wireless Audio
Listen to Wireless Audio
Connect to Wireless Network
Hub
(
Manager
)
Enable
Sender Signal Status
Front Enabled Front is ON
Front Disabled Front is OFF
Surround Enabled Surround signal is ON
Surround Disabled Surround signal is OFF
Subwoofer Enabled Subwoofer signal is ON
Subwoofer Disabled Subwoofer signal is OFF
Note
• The Front sender should be enabled if you want
to send the front left/right audio signals to other
Rocketboost receivers (for example
Rocketboost headphones or Rocketboost
receiver products in other rooms of your house.)
• We recommend that you do not enable
channels that you will not be using.
Note
Every Rocketboost™ network must contain a device
called a Hub, which directs network data traffic and
helps devices join the network. The network can
have only one hub. If you are setting up your network
for the first time, choose one of your Rocketboost
™
senders to be your hub. If you already have a
Rocketboost™ network, then set the Hub (Manager)
setting in to Disable.
Send Audio
Front
Surround
Subwoofer
< Enabled >
Enabled
Enabled
[< >] to Enable/Disable
Setup Menu
1. HDMI Input
2. Component
3. Digital Audio
4. Sp Config
5. Sp Distance
6. Level Cal
7. Audio Adjust
8. Source Setup
9. Hardware
10. HDMI Setup
11. Rocketboost
NS-AV511_11-0201_MAN_.book Page 12 Wednesday, April 13, 2011 9:31 AM