Filter
Top Products
15
I
ns
i
gn
i
a
NS
-
A2113
Mi
n
i
-
Sh
e
lf
S
ystem
www.insignia-products.com
To use the cassette player:
1 Press the POWER button to turn the shelf system on.
2 Slide the function selector to TAPE.
3 Open the cassette door by pressing the STOP/EJECT button at
the bottom of the door.
4 Insert a cassette tape, open side down, then press the door
closed.
5 Press the PLAY button to begin playback.
6 Adjust the sound level with the VOLUME control.
7 Press the DBBS button to boost the bass during playback (if
desired).
8 For private listening, plug your stereo headphones into the stereo
headphone jack on top of the player. The speakers mute
automatically.
9 Press the STOP button to stop the cassette playback.
To record with the cassette player:
1 Press the POWER button to turn the shelf system on.
2 Slide the function selector to RADIO.
3 Open the cassette door by pressing the STOP/EJECT button at
the bottom of the door.
4 Insert a blank cassette tape, open side down, then press the door
closed.
5 Tune the radio to the station you want to record, then press the
RECORD button.
6 Press the STOP button to stop recording.
Using your player to listen to another sound source
To use your player to listen to another sound source:
1 Make sure that the power is turned off, then connect a cable from
the audio out jacks on the device to the AUX-IN jacks on the back
of the player.
2 Press POWER to turn on the player, then slide the function switch
to select AUX.
3 Adjust the sound level with the VOLUME control.
Warning
To avoid damaging your hearing, set the volume to a low
level before putting on the headphones, then adjust the
volume up to a comfortable level.