Filter
Top Products
8
www.insignia-products.com
Setting up your home
theater system
Power source
Use the polarized AC line cord provided for
operation on AC power. Insert the AC cord plug
into a standard 120 V 60 Hz polarized AC outlet.
If you cause a static discharge when touching
your receiver and your receiver fails to function,
unplug it from the AC outlet and plug it back in.
Your receiver should return to normal operation.
Connecting the AM and FM antennas
To connect the AM and FM antennas:
1 Connect the AM loop antenna (provided) to
the AM jack on the back of the DVD receiver,
then place the antenna on a shelf or attach it
to a wall.
2 Connect the FM antenna (provided) to the
FM jack, then extend the antenna and attach
it to a wall.
For better FM stereo reception, connect an
external FM antenna (not provided) to the
DVD receiver.
Connecting the speakers and subwoofer
To connect the speakers and subwoofer
• Connect the speakers and subwoofer to the
DVD receiver using the speaker cables
(provided). Match the color of the jacks to the
speaker plugs, and fully insert the plugs into
the jacks.
Warnings
• The system uses a polarized AC plug with one wide blade
and one narrow. The plug only fits into matching polarized
power outlets. This is a safety feature to reduce the
possibility of electric shock. If the plug does not fit in your
power outlets, you might have outdated, non-polarized
outlets which should be changed by a qualified, licensed
electrician. Do not file the wide blade on the plug or use an
adapter to make the plug fit into your outlet. This defeats
the safety feature and could expose you to electric shock.
• Never connect the AC cord plug to other than the specified
voltage (120 V 60 Hz). Use the attached power cord only.
Notes
• Adjust the position of the antennas for optimal
reception.
• Position the antennas as far as possible from
your TV, VCR, or other radiation sources to
prevent unwanted interference.
# Speakers/Subwoofer – +
1 Surround (R) (grey) Black Grey
2 Surround (L) (blue) Black Blue
3 Subwoofer (purple) Black Purple
4 Front (R) (red) Black Red
5 Front (L) (white) Black White
6 Center (green) Black Green
Caution
• Make sure that the speaker cables are correctly connected.
Incorrect connections may damage the system due to short
circuit.
• Do not connect speakers with an impedance lower than the
speakers supplied. Refer to the Specifications section of
this manual.
1
2
3
4
5
6
VIDEO OUT COMPONENT