Filter
Top Products
6
www.insignia-products.com
Regional code
Your receiver has a regional code printed on the
back of the case. Your receiver can play only
DVDs labeled with the same regional code or
ALL.
Using progressive scan
You should note that not all high definition
televisions are fully compatible with this home
theater system and may cause artifacts to be
displayed in the picture.
In case of 525 or 625 progressive scan picture
problems, we recommend that you switch the
connection to the standard definition output. If
there are questions regarding your television’s
compatibility with this DVD player, contact our
customer service center.
Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic” and the double- D symbol are
trademarks of Dolby Laboratories.
Controls and connections
Front panel
Back panel
Notes
• Most DVDs have a globe with one or more numbers in it
clearly visible on the cover. This number must match your
receiver’s regional code or the DVD cannot play.
• If you try to play a DVD with a different regional code from
the receiver, the message “Wrong Region” appears on the
TV screen.
Item Description Function
1 STANDBY/ON button Press to toggle the DVD receiver on
(LED off) or off (LED on.
2 Disc tray Place a disc on the tray when it
opens.
3
OPEN/CLOSE
button
Press to open or close the disc tray.
4
PLAY/PAUSE
button
Press to start playback. When a disc
is playing, press to pause playback.
Press again to resume playback.
5
STOP button
Press to stop disc playback.
6 LEVEL Press to review or adjust each
speaker’s output level.
7 SOURCE Press to select the audio input
source you want.
8
PREVIOUS /
RADIO SCAN -
Press to skip to the previous
chapter or track, or to tune the radio
to a lower frequency station.
9
NEXT /RADIO
SCAN +
Press to skip to the next chapter or
track, or to tune the radio to a
higher frequency station.
10 DISPLAY Shows the current status of the
DVD receiver.
11 Remote sensor Receives signals from the remote
control.
12 VOL +/- Press to increase or decrease the
volume.
1
2
3
4
5
6
7
8
9
10
11
12
LEVEL
Item Description Function
1 AC power cord Plug into an AC power outlet.
2 Speaker
connections
Connect the right front, left front,
center, right rear, left rear, and
subwoofer speakers here.
3 AUDIO (AUX) IN Connect to the audio output jacks
from an external source, such as a
VCR or DVD player, to these jacks.
4 VIDEO OUT Connect to the video input jack of a
TV.
5 S-VIDEO OUT Connect to the S-Video input jack on
a TV.
6 COAXIAL IN Connect to the coaxial (digital) audio
output jacks of a DVD player or VCR.
7 COMPONENT
VIDEO OUT
(Y Pb Pr)
Connect to the component input
jacks on a TV (if available).
8 FM ANT. IN Connect the FM antenna cable to this
jack.
9 AM ANT. IN Connect the AM loop antenna cable
to this jack.
VIDEO OUT COMPONENT
1
2
3
4
5 6
7
8
9