Filter
Top Products
12 13
PROGRAM PLAY
This allows selected tracks on the disc to be played in any desired order.
To set the program play
! CD
a. In the stop mode, press the PROGRAM button and
0P-01 is displayed. PGM and 0 start flashing.
b. Press F.SKIP or B.SKIP button to select the track
number.
c. When desired track is displayed, press PROGRAM but-
ton to register. Then PGM and 0P-02 display .
d. Repeat steps (b) and (c) (up to 60 tracks). After regis-
tering all tracks, display shows the first registered track.
e. Registered track can be checked by pressing PRO-
GRAM button.
! MP3
a. In the stop mode, press the PROGRAM button and
0P-01 is displayed. Tracks number and album number
start flasing.
b. Press ALBUM UP and ALBUM DOWN button to select
the album number.
c. When desired album number is displayed,press F.SKIP
or B.SKIP button to select track number.
d. Press PROGRAM button to store, 0P-02 will appear on
display. Repeat (b) and (c) up to 60 tracks.
e. Registered tracks can be checked by pressing PROGRAM
button.
To complete programming and start play
Press PLAY/PAUSE button, the PGM
stops flashing and play will begin.
CD
MP3
INTRO PLAY
1. Press MODE button three times
(for CD) / four times (for MP3),
then INT is displayed.
2. Press the PLAY/PAUSE button.
Starts INTRO play from track
number 01.
3. The first 10 seconds of each
track of the disc will be played.
4. Press the PLAY/PAUSE button
again to return to normal
playback.
RANDOM PLAY
Enables all the tracks on a disc to be played in a Random (Shuffle) sequence.
1. Press MODE button four times
(for CD) / five times (for MP3),
and RDM is displayed.
2. Press PLAY/PAUSE button to
start RANDOM play.
3. Select RANDOM mode during
play, RDM play start.
! After finished playing the cur-
rent track or if F. SKIP or B.
SKIP button is pressed, RAN-
DOM play starts.
CD
MP3
CD
MP3
To clear programming
! Open the door, or
! Power off, or
! In program mode, press STOP button.