Filter
Top Products
27
Advanced Menu
Image:
3D Control:
3D: allow
s you to enjoy 3D (stereoscopic) content. Your projector supports
Auto, Top-Bottom, Frame Sequential, Frame Packing, Side-by-Side for con-
trolling LCD shutter glasses. In addition to the projector, you will need a pair
o
f 3D shutter glasses, 3D content, and 3D compatible source (and emitter).
Ensure the glasses you choose are consistent with the synchronization mode
you will be using.
3D Sync Invert: If the
image appears to flutter, look odd or if the image depth
looks off or you experience eye strain, turn this feature on to see if the image
improves.
Color...
Color: a
djusts a video image from black and white to fully saturated color.
The color setting applies to video sources only.
Red/Green/Blue Gain: adjusts the
gain of the red, green or blue channel of the
image.
Red/Green/Blue Offset: adjusts the offse
t of the red, green or blue channel of
the image.
Color Space: appl
ies to computer and component video sources. It allows
you to select a color space that has been specifically tuned for the input signal.
When Auto is selected, the projector automatically determines the standard.
To choose a different setting, turn off Auto, then choose RGB for computer
sources or choose either REC709 or REC601 for component video sources.
Color Temperature:
changes the intensity of the colors. Select a listed rela-
tive warmth value.
Gamma: s
elect the appropriate gamma from among Video, Film, Bright, and
CRT.
Tint: adjust
s the red-green color balance in the image of NTSC video images.
The tint setting applies to NTSC video sources only.
White Intensity: i
ncreases the brightness of whites that are near 100%.
PC:
Force Wide: when
this is off, the analog locking algorithms choose the stan-
dard mode resolution (4:3) as the preferred default resolution. When this is
on, the analog locking algorithms choose wide mode resolution (16:10) as the
preferred default resolution.
Phase: adjust
s the horizontal phase of a computer source.
Prevent PC Screen Saver:
prevents your computer from going into Screen
Save mode. The projector must be connected to the PC via a USB cable for
this feature to work.
Sync Threshold: (progressive
signals only) If a hardware device, such as a
DVD player, is not syncing properly with the projector, select this option to
help it to sync when connected to the projector.
Tracking:
adjusts the vertical scan of a computer source.
Horizontal/Vertical Position: a
djusts the position of a computer source.
Video:
Detect Film: determines whether the original source of the input video was
film (progressive) or video (interlaced).
Overscan: rem
oves noise around the video image.
Set Black Level: anal
yzes the current input image and calculates an offset value
which is then added to the analog to digital converter black level value. This
ensures optimum black level for each analog source.