Filter
Top Products
13
Getting Started
F
EN
ES
C
Customizing Your Monitor
Customizing Your Monitor
Locking the controls
You can protect adjustment data by locking the controls.
1 Press the button.
The MENU OSD appears.
2 Press the ./> buttons to select “ OPTION” and
press the
button again.
The OPTION OSD appears.
3 Press the ./> buttons to select “ (CONTROL
LOCK).”
4 Press the / button to select “ON.”
Press the
button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
Only the u (power) switch, EXIT, and “
(CONTROL
LOCK)” of the “
OPTION” OSD will operate. If any other
items are selected, the
mark appears on the screen.
To cancel the control lock
Repeat steps 1 through 3 above and press the ? button to
select “OFF.”
DEGAUSS
ON
OPT ION
CONTROL
LOCK
OFF ON
OPT ION
Restoring the color
The colors of most display monitors tend to gradually lose
brilliance over several years of service. The IMAGE
RESTORATION feature allows you to restore the color to
the original factory quality levels.
1 Press the button.
The MENU OSD appears.
2 Press the ./> buttons to select “ OPTION” and
press the
button again.
The OPTION OSD appears.
3 Press the ./> buttons to select “ (IMAGE
RESTORATION).”
4 Press the / button to select “ON.”
The picture disappears while the color is being restored
(about 2 seconds). After the color is restored, the picture
reappears on the screen again.
Press the button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
DEGAUSS
ON
OPT ION
ON
OPT ION
RETURN
COLOR