Filter
Top Products
- 7 -
Connect to AM antenna
AM loop antenna
a. Open the AM antenna terminals on the rear of the unit.
b. Attach the AM loop to its base by snapping the tabs on the
loop into the slot in the base.
c. Close each of the terminals to connect the antenna securely.
Rotate AM ring shape antenna till the receiving effect is the best.
(Dont place the AM ring shape antenna on the unit cover, or it will
affect the receiving effect.)
Connect to the assistance equipment
Connecting diagram
Connection precautions
This unit has two groups of audio input terminals, you can use signal line to connect audio input terminals
of this unit and audio output terminals of assistance equipment respectively, then you can hear the sound
sources.
Cautions:
Press the AUX1 function button to select AUX1 function.
When you are connecting AUX1 audio terminals, please press this function button.
Press the AUX2 function button to select AUX2 function.
When you are connecting AUX2 audio terminals, please press this function button.
Assistance equipment
Terminal board for the
assistance equipment
Terminal board for the player