Filter
Top Products
- 16 -
- Play a disc or tune in to the desired station.
- If you set the sleep timer first, each time you press the sleep button (
SLEEP), it changes
the number of minutes shown on the VFD in this sequence:
If you change the sleep timer, each time you press the sleep button (
SLEEP), it changes
the number of minutes shown on the VFD in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the display
as before setting the sleep timer.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time
When pressing the sleep button (
SLEEP), the remaining sleep time is displayed. After a few
seconds the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the sleep button (
SLEEP) until the 00 displays on the VFD.
It can also cancel the sleep timer by restart set the clock or turning off the system.
Function Menu Setting List
Caution: The content of this chart is for reference only. If something has changed, please take the realistic
display for standard.
Menu function setup
* If you want to set the function of this unit, please press the function setting button (SETUP)
to display the DVD function setting main menu, then use the
, , , buttons and ENTER
button. Press the function setting button (SETUP) again to exit the function setting main
menu.
(Note: And if the item displays in gray, that means that it cant be setup and there isnt this
function in the disc.)
General Setup Page
TV Display
This menu allows the user to select the aspect ratio of
the TV to be connected.
Angle Mark
Available only when the disc is with angle marks, you
can set the angle mark to show on TV screen or not.
OSD Lang
This menu allows the user to select the language for the
on-screen.
Captions
Set the captions to display or close.
Screen Saver
Set the screen saver to activate or cancel.
Last Memory
Set the last memory state to on or off.
- -
10 20
...
80 90 00
- -
15 10 20
...
80 90 00