Filter
Top Products
34
name with this first letter not existed, the LCD will display the next name according the order from A-Z), press
Accept call button “ ” once again to display the number, and then press it again to dial the number. (Press
Reject call button “
” to return to the last step).
Input Calling Card:
Press Accept call button “
” to make the LCD screen blink with “_”, then press one by one #->1->2->3->4-
>#, after about 6 seconds, the LCD will show “Input”, (if you want to exit from inputting calling card, press
Accept call button”
” to show “Writing” and return), then operate your mobile phone to transmit calling
cards one by one to the unit, the LCD will show the name of this call card, press Accept call button “
” to
show “writing” on LCD, then the unit will store the call card.
Clear up Calling Card:
Press Accept call button ”
” to make the LCD screen blink with “_”, then press one by one #->0->0->0->0-
># to clear up all the stored calling cards.
Note: When start inputting calling card from mobile phone to the device, the Bluetooth will start disconnect
between mobile phone and device. After finishing inputting calling card, due to different model of mobile
phone, some phones may auto connect with the device, but some phones not, in any case, you need to reconnect
to the Bluetooth between your mobile phone and the device to work the Bluetooth on the device.