Filter
Top Products
16
DISP REV: Rotate the knob to select LED display color between black and white.
BEEP
Turn BEEP on if you want the pressing of buttons to be sounded. Press SEL Button until the display shows
BEEP, then use the VOL+/- Button to turn BEEP sound ALL or OFF or 2
nd
(you hear BEEP sound when you
press the button over 1.5 seconds).
Turning the sound off
Press MUTE button to turn the sound off. Press it again or press VOL+/- buttons on the RC or rotate VOL knob
on the panel to turn the sound on.
Mode setting
Press MODE button on the panel repeatedly to select: TUNER => DVD (if inserted) => USB (if USB device is
inserted) => SD (if the flash card is inserted) => AUX.
Equalizer setting
Press and hold TA/DSP button on the unit or press DSP button on the RC to select the equalizer mode: FLAT
=> CLASSICS => POP => ROCK => DSP OFF.
AV jack
Intended to receive audio and video signals by connecting to outside input device.
Display
Press DIS/DUAL button on the unit or DISP/DUAL button on the RC to see current tuning information and
time. Sequence of the menu: Clock/Time => Radio Frequency => PTY=> Exit.