18
Anti-theft system
This unit is equipped with a slide-down detachable and mask panel. Panel can be detached and taken with you, helping to deter theft.
Detaching the front panel
1. Press the PWR button to turn the power off.
2. Press the OPEN button on the front panel.
3. Push the panel to the right and then pull it towards you.
4. Place the panel into the case and take it with you when you leave the car.
Attaching the control panel
1. Insert left side of the control panel into the main unit.
Note: the control panel must be attached into the T-Joint.
2. Press the right side of the panel until a click sound is heard.
Remove the unit
1. Remove the panel and the trim plate.
2. Insert both T-Keys into hole in front of the set until they lock.
3. Pull out the unit (pic. 1).
Pic. 1