Filter
Top Products
34-ST-03-57
Page 19
Availability
STR9xx
TABLE II - SEALS (continued)
3D 4G
Diaphragm Lower
_ _ _ _ _ _ BA _ _ _ _
••
_ _ _ _ _ _ BB _ _ _ _
••
_ _ _ _ _ _ BC _ _ _ _
••
_ _ _ _ _ _ BE _ _ _ _
••
_ _ _ _ _ _ BF _ _ _ _
11
_ _ _ _ _ _ BG _ _ _ _
11
_ _ _ _ _ _ BH _ _ _ _
10 10
Upper Upper Insert
_ _ _ _ _ _ _ _ 4 _ _ _
••
_ _ _ _ _ _ _ _ 5 _ _ _
••
_ _ _ _ _ _ _ _ _ 0 _ _
••
_ _ _ _ _ _ _ _ _ _ 0 _
••
One 1/4" with plastic plug _ _ _ _ _ _ _ _ _ _ H _
••
One 1/4" with metal plug _ _ _ _ _ _ _ _ _ _ J _
••
Metal plug material
Two 1/4" with plastic plugs _ _ _ _ _ _ _ _ _ _ M _
••
will be the same as
Two 1/4" with metal plugs _ _ _ _ _ _ _ _ _ _ N _
••
One 1/2" with plastic plug _ _ _ _ _ _ _ _ _ _ P _
••
metal plug is chosen -
One 1/2" with metal plug _ _ _ _ _ _ _ _ _ _ Q _
••
(SS Plug for CS Lower
Two 1/2" with plastic plugs _ _ _ _ _ _ _ _ _ _ R _
••
and Tantalum Clad)
Two 1/2" with metal plugs _ _ _ _ _ _ _ _ _ _ S _
••
_ _ _ _ _ _ _ _ _ _ _ K
cc
_ _ _ _ _ _ _ _ _ _ _ G
••
_ _ _ _ _ _ _ _ _ _ _ T
cc
_ _ _ _ _ _ _ _ _ _ _ L
dd
3" _ _ _ EFA _ _ _ _ _ _
••
(2.8" OD
_ _ _ EFC _ _ _ _ _ _
••
extension)
_ _ _ EFM _ _ _ _ _ _
••
4" _ _ _ FGA _ _ _ _ _ _
••
(3.70" OD
_ _ _ FGC _ _ _ _ _ _
••
extension)
_ _ _ FGP _ _ _ _ _ _
••
Diaphragm Ext. Tube
_ _ _ _ _ _ EA _ _ _ _
••
_ _ _ _ _ _ EB _ _ _ _
••
_ _ _ _ _ _ EC _ _ _ _
••
_ _ _ _ _ _ _ _ 7 _ _ _
••
_ _ _ _ _ _ _ _ 8 _ _ _
••
_ _ _ _ _ _ _ _ _ 0 _ _
••
_ _ _ _ _ _ _ _ _ _ 2 _
••
_ _ _ _ _ _ _ _ _ _ 4 _
••
_ _ _ _ _ _ _ _ _ _ 6 _
••
_ _ _ _ _ _ _ _ _ _ _ 0
••
Table II continued next page
*
Standard facing 125-250 AARH RF (raised face) serrated finish.
**
Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation
***
Bolt material will be same as Upper Material. However, if Table III bolt/nut option chosen, seal bolt material will be the same.
316 SS
316 SS
Selection
Selection
Selection
Selection
Gasket
ANSI Class 300
DIN DN80-PN40
Lower material, if
Diaphragm
Diameter
Flange Size
Grafoil
Teflon
Gylon 3510
Flange Pressure Rating *
Tantalum
Tantalum
Bolts***
Non-Wetted Material
(upper, upper insert)
316 SS
Flange Seal with
Extended
Diaphragm
CS (Nickel Plated)
316 SS
No Selection
2"
4"
6"
No SelectionNo Selection
316 SS
Flush Flanged
Seal with Lower
(continued)
NoneFlushing
Connections
and Plugs**
Klinger C-4401
(non-asbestos)
Carbon Steel
No Selection
Monel
316 SS
Wetted Material
Tantalum
316 SS
Hastelloy C
Tantalum Clad
316L SS
Hastelloy C
316 SS
Hastelloy C
Monel
Hastelloy C
Hastelloy C
ANSI Class 150
ANSI Class 300
316L SS
Hastelloy C
Bolts
Extension Length
316 SS
ANSI Class 150
2.8"
3.5"
Flange Material
Wetted Material
Hastelloy C
DIN DN100-PN40