Filter
Top Products
40
DIGITAL SATELLITE RECEIVER
Menu Guide
The menus are provided by the CA module
and its smart card.
Your receiver is equipped with two slots of Common Interface(CI),
accepting both Type 1 and Type 2 PCMCIA modules(see diagram below.).
Plug in the appropriate CI module together with a valid smart card. You will
then have access to the respective scrambled and Pay-Per-View services.
Insert the smart card into the CI module, and the CI module into the slot behind
the flap on the front panel.
The CI and smart card modules determine the programs that can be
de-scrambled. This receiver supports two CI slots so you can plug in two
different modules, automatically provide access to both services.
Each smart card contains your subscription details.
You can view your entitlement via the COMMON INTERFACE menu by
using the MENU button as below.
1. Press MENU button and select Common Interface then Slot1 and Slot2
will be showed up on the screen and the menu will be appeared.
If you use Slot1 for Irdeto, you will see “Irdeto” on the screen.
Also if you use Slot2 for Viaccess, you will see “Viaccess” on the screen.
Select the item and then you will see information for card.
Press EXIT button if you wish to exit from this menu.
2. If You inserted the smart card with CAM into the receiver, and switch
on the receiver. Then you will see “CAM Initializing icon” on the top screen.
3. If you do not insert the smart card, you will see the message
“Insert the valid smart card”.
If you insert the smart card into the CI module then you can watch your
selected channel.
Common Interface
k1.5 500 SAT(Eng) 1/5/06 5:53 PM ˘`40 mac-4 HP LaserJet 5100 Series T