21
DIGITAL SATELLITE RECEIVER
Menu Guide
3. C/KU Switch : You can select C/KU band by selection of switch type.
4. LNB Freq. : Select the proper LNB frequency referring to your LNB
using OK() and UP/DOWN() buttons.
5. C-LNB Freq. : When selecting the C/KU Switch is selected as “None”,
the C-LNB Freq will be dimmed automatically.
Press OK() button, and then the C-LNB Freq.
list will be displayed. You can also input the freq.
you want. After inputting freq. using numeric buttons,
press OK() button.
6. LNB Power : Select the LNB Power On or OFF.
7. 22KHz : Depending on the user’s antenna switch box or LNB.
You can supply either 22KHz by setting “ON” or not by
setting ”OFF”.
8. 0V/12V : Depending on the user’s antenna switch box.
You can choose either 0V/12V.
9. Tone Burst : Depending on the user’s antenna switch box.
(“off”, “SAT A” or “SAT B”)
10. DiSEqC : You can select and use appropriate port for your
DiSEqC switch box.
Press OK() button to select DiSEqC List.
(None, DiSEqC A, DiSEqC B, DiSEqC C, DiSEqC D)
●
After selecting all that is necessary, press RED button to scan the satellite list.
Pop up widow will be displayed.
●
Select ON or OFF according to your Network.
●
Select All or FTA Search Type.
●
Press OK() button and searching will start.
OK
OK
OK
OK
OK
Channel Search
k1.5 500 SAT(Eng) 1/5/06 5:53 PM ˘`21 mac-4 HP LaserJet 5100 Series T