Filter
Top Products
Introduction
Checklist For Making Software Changes
Chapter 116
Checklist For Making Software Changes
1. Read this Entire Document
It contains information for product installation configuration.
2. Check the Available File System Space
Before installing this product, make sure there is enough available
space in your file system in /opt/graphics. Your workstation needs
at least 133 megabytes of available disk space for all file sets and
patches.
3. Install the Latest Version of the Workstation ACE Software
Bundle and Graphics Bundle
Once you have installed the December 1999 (or later) Workstation
ACE bundle (B6825AA) for HP-UX 10.20 or November 1999 for
HP-UX 11.X; plus the graphics bundle (B6268A), you will have all the
necessary software to support the fx family product.
To install the ACE software or graphics bundle, execute the following
command as root:
/usr/sbin/swinstall
Choose the ACE software or graphics bundle and select Match What
Target Has in the Actions menu. Follow the standard procedure to
load that software.
4. Install 3D Graphics Application Programming Interfaces
(APIs)
If you are using or planning to use any of the following products, you
must install what you need from the HP-UX Developer’s CD. prior to
installing the Texture Accelerator Kit software.
• Starbase Dev. Kit
• HP PEX lib Dev. Kit
• OpenGL Dev. Kit
• OpenGL Runtime
The OpenGL runtime libraries are available from the latest DART
Release or by searching for OpenGL at the
http://www.software.hp.com website