Harman-Kardon MAS 102 Stereo System User Manual


 
MAS SYSTEM
18
Specifications
System
Power output: 65 watts per channel, 20Hz – 20kHz, THD <0.07%, into 6 ohms, both channels driven
Bandwidth: 20Hz–35kHz, –3dB
System frequency response: 20Hz–20kHz, ±0.5dB
Signal-to-noise ratio, A-weighted: 90dB (Analog inputs), 96dB (Digital inputs)
Channel separation: 65dB
Crosstalk between sources: 70dB
Line-level input sensitivity at 1kHz: 250mV RMS, ±1dB
Phono MM input sensitivity at 1kHz: 7.5mV
Loudspeakers
Low-frequency transducers: Two 130mm honeycomb composite drivers, ported
High-frequency transducers: Two 25mm MMD
®
domes, shielded
Nominal impedance: 8 ohms
Sensitivity (2.83V/1m): 85dB
Frequency response: 60Hz–25kHz (–3dB)
Crossover frequency: 2200Hz
FM Tuner Section
Frequency range: 87–108.0MHz
Usable sensitivity: IHF 1.3μV/13.2dBf
Frequency response: 10Hz to 15.3kHz
Signal-to-noise ratio: mono/stereo 68/65dB
Distortion: mono/stereo 0.15/0.3%
Stereo separation: 35dB @ 1kHz, 100% deviation @ 65dBf
Selectivity: ±300kHz: 65dBF
Image rejection: 80dB
IF rejection: 90dB
Tuner output level: 1kHz, ±50kHz, Dev 500mV
Number of presets: 30
RDS capability: PS (program service), RT (dynamic radio text)
Specifications