Filter
Top Products
MAS SYSTEM
9
Remote Control Functions
Clear: Clears the current preset station or a playlist entry.
sRadio: To delete the current preset station, press the Clear button while it is playing.
• Playlist: While programming a playlist, press the clear button to delete the track just
entered. After the playlist has been saved by pressing the Stop button, press the Clear
button to delete the entire playlist. To delete a single track, stop play, press the Check
button repeatedly until the desired track appears and press the Clear button. Press the
Play button to exit Check mode.
Program/Memory: Used to program playlists and radio presets.
• Radio: If the current station has not been programmed into a preset, press Program/
Memory and press the Enter button to store the station at the current preset number, or
use the numeric keys to enter a different preset number. The new preset will overwrite
the existing one.
• USB or CD (Audio or Data): Press the Program button to begin Program mode. Add
tracks to the playlist by using the Skip/Scan Transport Controls or the numeric keys to
select the track, then press the Program button to enter the selection. Add up to 99
files. Press Play to play the playlist, or Stop to save the playlist without playing it. During
playback, the order of the track in the playlist will appear on the left, with the disc’s
track number to the right. See pages 14 and 15.
Check: After a playlist has been programmed and play has been stopped, each press of
the Check button displays the tracks in the playlist.
Eject: When a CD is loaded, press this button to eject it.
FM Mode: Used with FM radio, each press toggles between Stereo and Monaural
playback.
Auto Store: Scans through all frequencies, searching for stations with acceptably strong
signal quality, and stores them as presets.
Random: Each press turns Random playback mode (shuffle) on or off. This mode plays
the tracks of the current disc or drive in random order.
Transport Controls
Track Skip/Tuning Up/Down: These buttons function differently, depending on which
source has been selected:
• iPod, CD or USB: Press and release to skip to the next track. Press the reverse button
twice to skip to the previous track.
• Radio: Press and release the Track Skip buttons to tune to the next higher or lower station
by one frequency increment. Press and hold to scan quickly through the stations.
Scan Forward/Reverse: Press and hold to scan forward or in reverse within a track
when the iPod, CD or USB sources are playing.
Play/Pause: Each tap toggles between the Play and Pause functions.
Stop: Fully stops playback.
Preset/Folder +/–: Selects a preset station or folder on a USB or data CD.
• Radio: Each press changes to the next or previous preset station, if any have been
programmed.
• USB or Data CD: Press once to open the current folder. Each additional press changes
to the next or previous folder. After 3 seconds, the first track in the new folder will
begin playing.
Mute: Press to temporarily silence the speakers. Press again to restore audio. Muting is
also canceled if the MAS system is turned off.
Volume +/–: Increases or decreases the volume. Press and hold to change the volume
more quickly.
Numeric Keys: Used to enter track numbers, radio stations or preset numbers, or while
adjusting the clock and alarm times.
–10 and +10 Numeric Key: Used with a USB device or CD to quickly advance through a
large number of tracks. Each press of these keys changes to the next or previous track
in increments of 10.