Harman-Kardon MAS 102 Stereo System User Manual


 
MAS SYSTEM
5
Front-Panel Controls
Controller and Amplifier
The MAS systems use touch-sensitive controls. To use a control, tap gently on its
lit icon.
NOTE:
Controls are the same for all models.
Power:
Turns the MAS system on or places it in Standby mode. To completely power
off the unit, unplug the power supply.

Message Display:
The time and messages are displayed in this two-line text
display.

CD Slot:
Load compatible discs here.

Skip/Scan Forward/Reverse:
These buttons function differently, depending on
the current source:
iPod, CD or USB: t Press and release to skip to the next track. Press the reverse button
twice to skip to the previous track. Press and hold to scan forward or reverse within
a track.
t Radio: Press and release to select the next programmed preset station. Press and
hold to scan quickly through the stations. When you release the button, the tuner
continues to scan until it finds a station of acceptably strong signal quality, and then it
stops. To stop the scan before a station is found, press the button again.

Play/Pause:
Each tap toggles between the Play and Pause functions.

Stop:
Fully stops playback.

Eject:
When a CD is loaded, tap here to eject it.

USB Port A:
Connect a compatible USB device here to enjoy playback of audio MP3
or WMA files. Although most USB flash and hard-disk drives in the FAT32 file format,
as well as many MP3 players, are compatible with the MAS system, due to the wide
variety of manufacturers, playback cannot be guaranteed. Do not connect an iPod
or iPhone to this port. Do not connect a personal computer or any peripherals to
this port.

Line-In Jack (Line Input):
Connect a stereo 3.5mm male-to-male cable (not
included) to the headphone or line-level output on a portable player or other device.

Headphone Jack:
Outputs a stereo signal for private listening through most
headphones that are equipped with a stereo 3.5mm plug.

Volume Control:
Increases or decreases the volume.
Note: Controls are the same for all models.
